S90V and S30V are both very high-end steels and can be found in the same price range. But what is the difference? Is one better than the other? What makes these knife steels so great? Well, let’s take a look! Here is the short answer: CPM-S90V is slightly better in...
Both 420HC and D2 are very common steels. And with each steel getting more and more popular, it can be hard to choose which one is better. So, let’s look at whether D2 or 420HC is better. Here is the short answer: D2 is harder and has better edge retention, but 420HC...
420HC and S30V are steels used by some of the biggest knife brands in the US. So, it only makes sense to compare the two. Let’s look at which steel is better and why. Here is the short answer: S30V is better steel than 420HC. While they are both stainless steel, S30V...
D2 and AUS-8 are both very common steels. And while D2 is found more in high-end knives, they are both worth comparing. In this article, we will be taking a deep dive into which blade steel is better and why. Here is the short answer: D2 is higher-quality steel...
8Cr13MoV and S30V are pretty much on the opposite ends of the steel spectrum. 8Cr13MoV is a budget steel and S30V is a premium steel. They couldn’t be further apart. Yet, there are reasons you may actually want to choose 8Cr13MoV over S30V. What are those...
Both 8Cr13MoV and 14C28N are budget steels--and with budget steels, it’s often pretty tough to know the difference. After all, they’re nearly all the same. So, which one’s better? 8Cr13MoV and 14C28N are both useful in different scenarios: 14C28N takes a better edge...
So… 8Cr13MoV vs 9Cr18MoV… both extremely cryptic steel names. What do they mean? Which one’s better? Chances are, the one with the higher numbers sounds better, but then again, maybe it’s like golf? Maybe the smaller number is better. Let’s dive into the differences...
For their prices, 8Cr13MoV and VG-10 are both great steels. But, of course, there are differences between the two. Which one’s better? Here’s the short version: VG-10 is a better steel than 8Cr13MoV. It’s got better corrosion resistance, edge retention, and toughness....
8Cr13MoV and AUS-8 are both great steels for the price. They’re both really affordable knife steels that you’ll be able to use and abuse without much guilt. But, of course, we want to know which one is better. So, here’s the short version: 8Cr13MoV and AUS-8 are going...
S35VN (the full name of which is CPM-S35VN) and 20CV (also called CPM-20CV) are both on the high-end of the spectrum of knife steels. They’re both great options, but what exactly are the differences? Here’s the short version: S35VN and 20CV are both great steels, but...
8Cr13MoV and 420HC are both good budget steels used in knives--if (as with just about everything) you can get them from reputable companies. Which one’s better, though? Well, here’s the short version: On paper, 8Cr13MoV is better than 420HC. If all things were equal,...
8Cr13MoV and 440C are both decent steels for their price. But as with almost all budget steels, it’s pretty hard to find out which one is better than the other. Since they’re budget steels, they don’t always receive the same attention as the higher-end steels. So,...